Benzophenone-3,3',4,4'-tetracar-boxylic dianhydride (‘BTDA’)

5

Only to be used at up to 43 % (w/ w) as a co-monomer in the production of polyimides for use in contact with foods for which only simulants B and/or D2 are laid down in table 2 of Annex III at temperatures up to 250 °C.

Phosphoric acid, mixed esters with 2-hydroxyethyl methacrylate

0,05

Only to be used at up to 0,35 % (w/w) to manufacture poly-methylmethacrylate. SML expressed as the sum of the mono-, di-and triesters of phos-phoric acid and the mono-, di-, tri-and tetraesters of diphosphoric acid

N, N-bis(2-hydroxyethyl)steary-lamine partially esterified with saturated C16/C18 fatty acids

Only to be used at up to 2 % (w/ w) in plastic materials and articles intended for the packaging by food business operators of dry foods for which simulant E is assigned in table 2 of Annex III.

(triethanolamine-perchlorate, sodium salt) dimer

Only to be used in rigid poly(vinyl chloride) in contact with foods included in the food category with reference number 01.01.A in table 2 of Annex III

bis(2-ethylhexyl) cyclohexane-1,4-dicarboxylate (DEHCH)

5

Only to be used as an additive in poly(vinyl chloride) (PVC) at up to 25 % w/w in contact at room temperature or below with foods for which food simulants A or B are assigned in Table 2 of Annex III.

tris(2-ethylhexyl) benzene-1,2,4-tricarboxylate

1

Only to be used as plasticiser to manufacture soft poly(vinyl chloride) Not to be used in contact with foods intended for infants (11)

Titanium dioxide surface-treated with fluoride-modified alumina

Only to be used at up to 25,0 % w/w, including in the nanoform.

Phosphorous acid, triphenyl ester, polymer with alpha-hydro-omega-hydroxypoly[oxy(methyl-1,2-ethanediyl)], C10-16 alkyl esters

0,05

To be used only: a) as an additive at up to 0,2 % w/w in high impact poly-styrene materials and articles intended for contact with food at room temperature and below, including hot-fill and/ or heating up to 100 °C for up to 2 hours. It shall not be used in contact with foods for which simulant C and/or D1 is assigned in Annex III. b) as an additive at up to 0,025 % w/w in acrylonitrile-butadiene-styrene (ABS) materials for use at room temperature and below

Montmorillonite clay modified with hexadecyltrimethyl-ammonium bromide

Only to be used as additive at up to 4,0 % w/w in polylactic acid plastics intended for long-term storage of water at ambient temperature or below. Can form platelets in the nanoform that are in one or two dimensions thinner than 100 nm. Such platelets shall be oriented parallel to the polymer surface and shall be fully embedded in the polymer.

isobutane

Only to be used as a blowing agent.